Tel: +86-532-83500538
News
Home > News > Content

Long Service Life Of Wire Rope Clamp

Qingdao Jiechao Machinery Co.,Ltd | Updated: Aug 07, 2017


The Wire rope clamp (also known as the Steel Wire rope chuck) has a rope end fixed or connected function, it is often used with the wire rope, suitable for cranes, mining transportation, shipbuilding and construction and other heavy duty conditions. If it is not professional to do this kind of work people may not be very familiar with these things, but it doesn't matter, if you want to know the specific information of wire rope clips, such as the type of wire rope clips, the use of methods, notes, etc., Wire rope clip please follow the small series to read the following article, I believe the following information will help you. Common in the market is the carbon steel casting process, the national standards, casting steel rope head can be used. However, with the development of modern industrialization, casting steel wire rope chuck due to the natural process of some defects (pores, cracks, sand), in the humid, acidic alkaline, impact frequency and other special occasions, should be used cautiously. Wire rope clip Hebei Iron Man Machinery has developed a forged steel rope card head.

Use of wire rope clamps:

First, carbon steel wire Rope card head commonly used static tying, rope cable fastening, such as power, communication lines, strapping fastening and so on. Forged Steel wire Rope chuck is often used for hoisting and carrying, such as all kinds of engineering hoisting machinery, metallurgical mining equipment, Wire rope clip oil field Derrick, port railway loading and unloading, forestry machinery, power equipment, aviation and sea, land transport, engineering Rescue, salvage wreck, mining enterprises lifting, hoisting, traction rigging. Stainless steel wire Rope chuck because of its corrosion resistance, not easy to rust, it is used in the ship parts, chemical plants, radiation and other environments. Second, characteristics: and steel wire rope strength, the use of safety, Wire rope clip beautiful appearance transition smooth, lifting work safety load, can combat impact load, long service life.

Steel Wire Clamp Use method: 1. The steel wire clamp should fasten the clamp seat on the working section of the Wire rope, and the U-shaped bolt is fastened on the end of the wire rope. 2. The wire rope clamp shall not be arranged alternately on the wire rope. 3. The distance between the clamps is equal to 6-7 times the diameter of wire rope.

Note: (1) The steel wire clamp should fasten the clamp seat on the working section of the Wire rope, the U-shaped bolt is fastened on the tail section of the wire rope, Wire rope clip and the wire rope clamp shall not be arranged alternately on the wire rope. (2) When the rope clamp is properly arranged, the strength of the fixed place is at least 80% of the wire rope's own strength, and the rope clamp is under 1 and 2 times in actual use to tighten the nut further. (3) The rope clip closest to the sleeve ring should be as close to the sleeve ring as possible, and when fastening the clamp, the reasonable force of each clamp should be considered, and the rope clip farthest from the sleeve ring should not be fastened first alone. (4) In order to facilitate the inspection of the joint, Wire rope clip can be at the end of the last clip about 500mm at a clip head, and the line release a "Safe Bend." When the wire rope of the joint is sliding, the "safety bend" is straightened and the action should be taken immediately. (5) The use of wire rope clamp consolidation, should be as far as possible use of horse-type clips, while the "Mine" bolt inside the net distance should be with the diameter of the wire rope to adapt to the size of the big kcal, the bolts must be tightened, the diameter of the wire rope should be 1/3.

Specification for wire Rope clamps

1, Wire Rope Clamp connection method

Steel Wire CLAMP Specifications Model 6, 8, 10, 12, 14, 16, 18, 20, 22, 25, 28, 32, 36, 40 steel Wire Rope Clamp connection method commonly used in clamp head. Usually used wire rope clips, there are horse-style, pressure plate and fist-style three kinds, including riding-style even the strongest, the most widely used, pressure plate second, fist-style because there is no base, easy to damage the wire rope, even the relay is poor, so, only for the secondary place. Wire Rope Clamp In the use should pay attention to a few points: the choice of Chuck, Wire rope clip it should be the U-Ring of the inner net distance than the diameter of wire rope 1~3mm, too big card buckle connection card is not tight, prone to accidents. When the top chuck must tighten the bolt until the rope is compressed $number diameter, and after the rope force, and then the chuck Bolt tightening once to ensure that the joint firmly and reliably. The Chuck is arranged in a smooth arrangement, and the U-shaped part is in contact with the line and cannot be contacted with the main rope. Wire rope clip If the U-shaped part is in contact with the main rope, the main rope is compressed and the force is easily broken. In order to make it easy to check whether the joint is reliable and whether the wire rope is sliding, a chuck can be line at about 500mm behind the best chuck and release a "Safe Bend". In this way, when the wire rope of the joint occurs, the "Safety bend" is straightened first, and then the action should be taken immediately.