Tel: +86-532-83500538
News
Home > News > Content

The Hook Has A Stable And Not Deformed Function

Qingdao Jiechao Machinery Co.,Ltd | Updated: Aug 17, 2017



A claw and an anchor that is characterized by an elastic deformation. However, from the figure can be understood that the patent of the Claw and the anchor part of the structure of each other buckle, because only the combination of the handle and hook body is convenient, and ignore the combination of the two components of the overall tenacity, it is very easy due to the claw in the handle part of the book, and make the hook body in the force of the anchor directly pressure the top edge of the claw, and then form the deformation of the claw part of the bending, Snap hook and the hook is a piece of body bending, lack of effective support hook body shape, Therefore, it will lead to the use of the hook when it is very easy to pull by external forces caused by bending and fracture, and the contact surface of its anchor and claw part, the anchor in the rotation, it is very easy due to the thickness of the claw part and too soft, Snap hook so that the hook body is not very smooth rotation

In view of the shortcomings of the above-mentioned articles, the creator especially for the most vulnerable parts of the buckle hook components for a holistic strengthening, Snap hook and at the same time improve the clasp handle body and hook body, and then through continuous trial and design, then have this stable and strong clasp hook structure developed successfully.

The purpose of the utility model is to provide a clasp hook for the part of the handle body and hook body of the existing clasp hook. As an integral enhancement and improvement, the improvement lies in the use of the convex buckle of the hook body into the clamping hole in the center of the lower part of the handle body, Snap hook and the fastening surface below the convex clasp is securely offset to the upper surface of the bottom side of the capacitive end. And so that the convex buckle can be freely rotated, supplemented with its hook body above the thick toughness of the hollow hole has a inverted drop-shaped elastic holes, and make it in the implementation is not easy to be pulled by external forces caused by deformation and fracture, And then the tongue slice of the hook body is arranged in an outward inclination to the extension, Snap hook so that the end of the tongue can be effectively deducted into the end of the hook to the inside of the top of the tilted surface, you can effectively bear the hook to hook to set up the heavier items to achieve the clasp hook solid durability and stable deformation function.

The hook body in the convex buckle side outward horizontal extension set out once and by the inward outside of the long tongue piece, Snap hook the end of the tongue can be deducted into the hook end of the top of the surface, with a reaction of the tongue is pressed against the top of the surface.

The utility model is positioned in a two-side relative shaft hole of a hanging belt part, which is arranged by a two lateral external convex extension of a handle body. And using the convex buckle above the hook body to place the clamping hole in the center of the lower part of the handle body, Snap hook and make the fastening face below the convex clasp securely offset to the upper surface of the bottom side of the capacitive end, Snap hook the convex buckle can be freely rotated in the space of the Kahakong and the capacitive part, and then in the top of the thick toughness of the hook body, an elastic hole is inverted, and the horizontal extension of the front of the elastic hole is by facing downward and sticking out a tongue piece. , and the end of the tongue in the inward pressure is located at the end of the hook at the bottom of the inclined concave position, the hook structure is solid, difficult to deformation and easy to rotate.