Tel: +86-532-83500538
News
Home > News > Content

Using Method Of Wire Rope Clamp

Qingdao Jiechao Machinery Co.,Ltd | Updated: Aug 17, 2017


The Wire rope clamp (also known as the Steel Wire rope chuck) has a rope end fixed or connected function, it is often used with the wire rope, suitable for cranes, mining transportation, shipbuilding and construction and other heavy duty conditions. If it is not professional to do this kind of work people may not be very familiar with these things, but it doesn't matter, if you want to know the specific information of wire rope clips, Wire rope clip such as the type of wire rope clips, the use of methods, notes, etc., please follow the small series to read the following article, I believe the following information will help you. The type of wire rope clamp commonly used in the market is the carbon steel casting process, the national standard stipulates that the casting steel wire rope chuck can use. However, Wire rope clip with the development of modern industrialization, casting steel wire rope chuck due to the natural process of some defects (pores, cracks, sand), in the humid, acidic alkaline, impact frequency and other special occasions, should be used cautiously.

Use of wire rope clamps:

First, carbon steel wire Rope card head commonly used static tying, rope cable fastening, such as power, communication lines, strapping fastening and so on. Forged Steel wire Rope chuck is often used for hoisting and carrying, such as all kinds of engineering hoisting machinery, Wire rope clip metallurgical mining equipment, oil field Derrick, port railway loading and unloading, forestry machinery, power equipment, aviation and sea, land transport, engineering Rescue, salvage wreck, mining enterprises lifting, hoisting, traction rigging. Stainless steel wire Rope chuck because of its corrosion resistance, not easy to rust, it is used in the ship parts, chemical plants, Wire rope clip radiation and other environments. Second, characteristics: and steel wire rope strength, the use of safety, beautiful appearance transition smooth, lifting work safety load, can combat impact load, long service life.

Method of using wire rope clamp:

1. The clamp shall be fastened to the working section of the Wire rope, and the U-shaped bolt is fastened on the end of the wire rope.

2. The wire rope clamp shall not be arranged alternately on the wire rope.

3. The distance between the clamps is equal to 6-7 times the diameter of wire rope.

4. Rope clamp Nominal size wire Rope clamp Minimum quantity group ≤19  3

5 Fastening The rope clamp must consider each clamp reasonable force, Wire rope clip the rope clip farthest from the sleeve ring should not be fastened first alone

6. The rope clips closest to the ring should be as close as possible to the sleeve ring.

Precautions for use of steel wire clips:

(1) The steel wire clamp should fasten the clamp seat on the working section of the Wire rope, the U-shaped bolt is fastened on the tail section of the wire rope, and the wire rope clamp shall not be arranged alternately on the wire rope.

(2) When the rope clamp is properly arranged, Wire rope clip the strength of the fixed place is at least 80% of the wire rope's own strength, and the rope clamp is under 1 and 2 times in actual use to tighten the nut further.

3 the rope clip closest to the sleeve ring should be as close to the sleeve ring as possible, Wire rope clip and when fastening the clamp, the reasonable force of each clamp should be taken into account, and the rope clip farthest from the ring should not be fastened first alone.

(4) In order to facilitate the inspection of the joint, can be at the end of the last clip about 500mm at a clip head, and the line release a "Safe Bend." When the wire rope of the joint is sliding, the "safety bend" is straightened and the action should be taken immediately.

(5) The use of wire rope clamp consolidation, should be as far as possible use of horse-type clips, while the "Mine" bolt inside the net distance should be with the diameter of the wire rope to adapt to the size of the big kcal, the bolts must be tightened, the diameter of the wire rope should be 1/3.

Steel wire clamp seems to be a very humble gadget, but in fact it is indispensable in the operation of heavy industry, without its wire rope will not play a corresponding role, therefore, Wire rope clip the correct position of its location, to understand its use norms is very important. Finally, the small part to remind you that you must carefully read the above text, this is necessary before the operation of the preparatory work, wire rope clips without a fixed good work can not continue.